|
|
| Input Channels | Specification |
| Analog Inputs [1] | 8 (4 x BNC + 4 x POD) |
| Analog Channels [2] | 4 (quad A/D converters) |
| Analog Bandwidth [3] | 100 MHz (BNC), 20 MHz (POD) |
| Logic Channels (POD) [2] | 8 (3.3/5V CMOS/TTL) |
| Input Impedance | 1M±1%, 20pF (BNC), 100K/10pF (POD) |
| Input Coupling | AC, DC, GND (BNC), DC (POD) |
| Input Range (BNC) | ±48.8mV ~ ±11.8V in 8 ranges |
| Input Range (POD) | ±462mV ~ ±5.43V in 4 ranges |
| Input Prescale [4] | x20 (BNC only) |
| Probe Attenuation | 1:1 to 3000:1 in 16 ranges |
| Protocol Capture | UART, SPI, I2C & CAN Bus |
| Vertical Scaling | 500 uV/div to 5 V/div (1:1 probe) |
| Vertical Accuracy | ±2% or ±3% (prescale enabled) |
| Analog Sensitivity | 1mV to 40mV (no prescale enabled) |
| Maximum Sensitivity [5] | 200 uV (Time), 40uV (Freq), 10uV (Dithered Mean) |
| Data Acquisition | Specification |
| Streaming Sample Rates [6] | 1Sa/S to 70kSa/S (continuous) |
| Real-Time Sample Rates [7] | 15kSa/S to 40MSa/S (per buffer) |
| Sub-Sampling Rates [8] | 1MSa/S to 1GSa/S (per buffer) |
| Timebase Range (real-time) | 100nS/div ~ 500mS/div |
| Timebase Range (streaming) | 10mS/div ~ 500S/div |
| Timebase Range (sub-sampling) | 1nS/div ~ 1mS/div |
| Timebase Accuracy | 0.01% (100ppm) |
| Hardware Sample Rates | 15kSa/S to 40MSa/S (2000+ rates) |
| Capture Buffers | 128kS x 4 (analog) plus 128kS x 8 (logic) |
| Capture Resolution | 8 bit converter with 6.8 to 7.6 ENOB |
| Maximum Resolution [9] | 12 ENOB (at 1MHz and lower) |
| Display Frame Rate (max) | 50 Hz (single channel, 20 mS per analog channel) |
| Triggers & Timing | Specification |
| Trigger Types | Edge (Rise/Fall), Level/State, Logic & Ext. |
| Trigger Level Range | Same as selected Input Range |
| Hysteresis/Sensitivity | ±2% full scale (per range) |
| Pre-Trigger Hold-Off | 10uS ~ 1S |
| Duration Trigger Filter | 10uS ~ 150uS |
| External Trigger Bus | YES (logic inputs may also be used) |
| Post-Trigger Delay | 8 uS to 2 hours (programmable) |
| Logic Pattern Trigger | 8 bit on logic or digitized analog |
| High Speed Trigger | YES (on any analog input) |
| Glitch Capture (min) | 25nS (logic channel or trigger) |
| Interfaces | Specification |
| Analog Interface | 4 x BNC and 4 x POD |
| Logic Interface | 1 x IDC-26 (inc. logic, analog, data and power) |
| Control Interface (POD) | V+, V-, GND, Serial I/O |
| Front Panel Pins | Calibration, Trigger Bus, GND |
| Host Interface | Isolated Ethernet (RJ-45/CAT-5) |
| Data Upload Speed (max) | 1.2 Mb/S (Raw Data), 450 kb/S (Enhanced) |
| Host/General | Specification |
| Included PC Software [10] | BitScope DSO Virtual Instrument Software |
| Optional PC Software [10] | BitScope Logic, Meter, Chart & Library |
| Power Requirement | 12 VDC @ 1A (max), 2.5mm CP |
| Operating Temperature | 0ºC to 50ºC (or 20ºC to 30ºC for quoted accuracy) |
| Storage Requirements | -40°C to +60°C / 5% to 85% RH |
| Mounting Options | Desktop or 19 Rackmount |
| Dimensions (WxDxH)(net) | 225 x 180 x 42 mm |
| Product Weight (net) | 1.05kg (desktop), 1.85kg (rackmount) |
DH19A | E&OE
| [1] | Analog capture for each channel is selectable between the BNC or POD inputs individually. |
| [2] | Dedicated A/D converter for each analog channel to support sample synchronous capture at all supported hardware rates on both analog channels or one analog and all logic channels. |
| [3] | Maximum bandwidth of analog channels captured using equivalent time sampling or used with the multi-band spectrum analyzer via 10:1 probes with prescale disabled and waveform amplitude captured to 10% full-scale. |
| [4] | User selectable analog input prescaler for use with low level signals or when 20MHz input bandwidth limiting is required. |
| [5] | Minimum measurable peak-to-peak sinusoidal waveform voltage when both resolution enhancement and input multiplier are enabled, when viewed as a waveform (Time) or viewed as a spectrum (Freq) and the minimum measurable average DC voltage (Mean). |
| [6] | Streaming capture sample rates for data logging and transient recorder applications. |
| [7] | Real-Time (Nyquist Limited) sample rates (captured per frame). |
| [8] | Equivalent-Time (not Nyquist limited) sample rates sample rates (captured per frame). Applies to periodic signals only. |
| [9] | Specifies the maximum effective number of bits (ENOB) achieveable with resolution enhancement enabled. |
| [10] | All specifications are quoted on the basis that the product is used with the apropriate BitScope software. |
|
