BitScope Blade Uno Pi

Power and mount one Raspberry Pi and HAT

BitScope Blade BB01 is a power and mounting solution for Raspberry Pi, a HAT and (optionally) the Display.

It's perfect for building industrial strength stand-alone physical computing solutions with Raspberry Pi.

BitScope Blade 01, Uno Pi, Power & Mounting for Raspberry Pi & HAT (Pi & HAT not included).

Key Features

  • For Raspberry Pi and one HAT.
  • Works with Pi 7" Touch Display.
  • Powerful switch mode supply.
  • Can use 9V to 48V power source.
  • Compatible with 12V & 24V UPS.
  • Use with standard PoE solutions.
  • Power external USB HDD & SSD.
  • Up to 4 high current USB devices.
  • Rack mount solutions available.
  • 4 x 3mm mounting + stand-offs.
  • Power tabs for "cable free" use.
  • Low cost, light weight and generates very little heat.
  • A complete industrial quality, reliable power and mounting solution for Raspberry Pi.

Product Overview

BitScope Blade Uno Pi is a rack and wall mountable power solution for a Raspberry Pi and an associated HAT.

BitScope Blade 01, Uno Pi, Power & Mounting for Raspberry Pi & HAT

Uno Pi solves the power problem when using Raspberry Pi in industrial and related mission critical applications.

It has a built-in 5V switch mode power supply capable of powering the Raspberry Pi, the HAT and up to four high current devices connected via the Raspberry Pi.

Such devices can include almost any type of USB hard disk (HDD) or solid-state drive (SSD). Of course any USB powered BitScope (such as BitScope Micro) other peripherals such as keyboards, mice, WiFi and Bluetooth dongles can all be used.

Uno Pi accepts supply voltages ranging from 9V to 48V so it's compatible with 9V, 12V, 24V and 48V power sources. It can be used with simple plug packs, 12V batteries, low cost uninterruptible power supplies (UPS) and even passive power over ethernet (PoE) solutions.

Uno Pi can accommodate a standard mini-breadboard in the HAT slot for circuit prototyping. It can even be used to power and mount the Raspberry Pi 7" Touchscreen Display, one Raspberry Pi, a HAT and up to four BitScopes!

BitScope Blade 01, Uno Pi, Power & Mounting for Raspberry Pi & HAT

BitScope Blade Server Packs

BitScope Blade Uno Pi is compatible with Duo Pi and can used in the same cluster pack configuration.

BitScope Blade Pack 10, Power & Mounting for 10 Raspberry Pi (Raspberry Pi not included).

By mixing Uno Pi and Duo Pi it is possible to create Blade Packs and BitScope Servers that support HAT hardware. For example, include one Uno Pi blade with a Raspberry Pi and Sense HAT in a BitScope Blade Rack to monitor the rack temperature, humidity, vibrations. Mount a BitScope Micro powered and controlled from the same blade to monitor system current and voltage to build a complete self monitored server system.

Two packs can be mounted side-by-side in a 19" rack to build a Blade Rack 20 server just 5RU high.

BitScope Blade Rack 20, Power & Mounting for 20 Raspberry Pi (Raspberry Pi not included).

See BitScope Blade Duo Pi for more information about Blade Packs and Racks.

Specifications

Product Name BB01 BitScope Blade Uno Pi
Compatible Raspberry Pi Models Raspberry Pi 3, 2, B+, A+ and Pi Zero
Supports Raspberry Pi Display Yes (optional wall mount).
Raspberry Pi per Unit 1
USB Ports per Unit 4
HAT Devices per Blade 1
HDMI & sound outputs Yes
Primary Power 5V (Raspberry Pi J8, HAT & 2 x USB ports)
Auxilliary Power 5V (via 3-pin reversable header)
Indicator LEDs Board Power & Device Available
Device power-down header Yes
Processor reset/interrupt Yes
Blade mount tabs Vcc & Gnd with M3 holes
Raspberry Pi mounts M2.5 per HAT specification
Mounting feet included Yes
19" rack compatible 5RU (with metalwork option)
DIN Rail compatible Yes (with DIN rail option)
Power budget 4A (peak), 3A (continous)
UPS compatible Yes (includes blocking diode)
PoE compatible Yes (with passive PoE cable)
Power Requirement 9V (4A) ~ 48 V (500mA)
Operating Temperature 0 °C to 40 °C
Storage Requirements -40 °C ~ +40 °C / 5 % ~ 95 % RH
Dimensions (W x D x H) 65 x 160 x 25 mm
Weight (Net) 67g

EL04C 01 FB26L 05

Related Posts

Raspberry
Learn all about BitScope Blade Raspberry Pi Clusters.xoNov 18
BitScope
Scalable clusters make HPC R&D easy as Raspberry Pi.Nov 13
BitScope
You haven't seen BitScope Blade and Raspberry Pi like this before!Nov 08
BitScope
Farnell element14 interviews BitScope CEO Bruce TullochMar 29
BitScope
How to assemble and get started using BitScope Blade.Feb 20
Raspberry
Heatwave no problem for BitScope Blade and Raspberry Pi !Feb 10
BitScope
Raspberry Pi Applications built with BitScope Blade.Feb 6
Education
An Interactive Museum Exhibit built with BitScope Blade.Jan 27
Raspberry
BitScope Blade Uno Raspberry Pi Weather Station in Nepal.Jan 24
BitScope
BitScope Designs and element14 launch new Blade for Raspberry Pi !Jan 23
Education
BitScope, Blade & Raspberry Pi at the Sydney Maker Faire!Aug 20
BitScope
Physical Computing with BitScope, Blade and Raspberry Pi.May 27
Raspberry
Build servers with Raspberry Pi and BitScope Blade.Mar 16
BitScope
Raspberry Pi 3 Model B unboxed & reviewed with Duo Pi.Mar 07
Raspberry
Raspberry Pi 3 Launch and BitScope BladeFeb 29
BitScope
Physical Computing with Raspberry Pi and BitScope!Dec 01
Raspberry
BitScope Micro with Raspberry Pi Touchscreen Display!Sep 09
Raspberry
BitScope, Ozberry & Pimoroni at Sydney Mini Maker Faire!Aug 12
Raspberry
BitScope Blade for Raspberry Pi at Hannover Maker Faire!Jun 05