Feature Specification
Analog Inputs [1] 2 x BNC + 2 x POD
Logic Inputs 8 x POD
Analog Bandwidth [2] 100 MHz
Convertor Bandwidth [3] 75 ~ 100 MHz
Input Impedance 1M/20 pF (standard oscilloscope)
Input Voltage Range (+/-) 262mV ~ 5.52V (x1) & 2.6V ~ 55.2V (x10)
Analog Sensitivity 2mV ~ 50mV
Maximum Sensitivity [4] 300 uV
Fast Sample Rates 4, 5, 10, 13.5, 20, 25, 33, 40 MS/s
Slow Sample Rates [5] 4 kHz ~ 1 MHz (slow) & <1 Hz (burst mode)
Channel Buffer Depth 32 kS x 2 (analog and digital)
Resolution (Convertor) TLC5540 8 bit convertor with 6.8 ~ 7.6 ENOB
Maximum Resolution [6] 11.5 ENOB
Glitch Capture 25 nS
BitScope Digital Trigger 8 bit combinatorial on logic or A/D output.
High Speed Analog Trigger YES
Waveform Generator [7] 10 MS/s (switchable through BNC Channel B)
Analog Interface 2 x BNC and 2 x POD
Logic Interface 1 x DB25 (inc. logic, analog, data and power)
Data Upload Speed (Max) 1.25 Mb/s
Host Interface Options [8] USB, Ethernet, RS-232
Standard PC Software BitScope DSO
Power Requirement 12VDC 500 mA
Operating Temperature 0ºC to 50ºC
Storage Temperature -20°C to +60°C
Size (mm) 150x170x55
[1] Analog capture for both channels is selectable from BNC or POD inputs.
[2] Input bandwidth refers to the bandwidth of the analog input circuitry.
[3] The A/D convertor module bandwidth is 75 MHz. BS300 includes compensation for this convertor to achieve 100 MHz bandwidth throughout.
[4] Specifies minimum viewable voltage with resolution enhancement.
[5] In addition to the fast sample rates, a wide range of "slow clock" and "burst clock" rates are supported (to below 1 Hz). Burst clocking also supports further increased bit resolution (ENOB).
[6] Specifies the maximum effective number of bits (ENOB) achieveable with resolution enhancement enabled.
[7] The waveform generator is now included as standard in all BS300 systems.
[8] Both BNA-01 and BNA-03 can be used with BS300.